search

MyBinding Standard 3030x Bedienerhandbuch Seite 23

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 78
  • Inhaltsverzeichnis
  • LESEZEICHEN
    • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 22
6.0 Operation
6.8 Display Panel
Dis
p
la
y
SEND Ke
y
IN/MM Ke
y
Variable Speed
Pinpoint Backgauge
Control
Soft
Keys
ENTER Ke
y
CLEAR Ke
y
Push-Out Ke
y
Arrow Keys
Priority Add
(X/Y) Key
Figure 19
6.9 Definition of Keys
6.9.1 Variable Speed Pinpoint Backgauge Control
The backgauge control is used to manually position the backgauge. The speed of the backgauge will
depend upon where the actuator is pressed. Press farther from center for a faster speed. Press
toward the operator for forward direction and away from the operator for reverse direction.
6.9.2 IN/MM Key
This key toggles the display to show the position and programmed send values in inches (e.g. 5.250),
inch fractions to the nearest 1/64” (e.g. 5_
1
/
4
), or millimeters (e.g. 133.3).
6.9.3 Send Key
The SEND key is used to send the backgauge to any valid position. If an attempt is made to send the
backgauge to an illegal position, an error message will be displayed at the bottom of the screen
stating “Number outside limit”. In the Job mode, the SEND key will also advance the backgauge to
the next sequential cut position before performing the cut.
22
Seitenansicht 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 77 78

Kommentare zu diesen Handbüchern

Keine Kommentare
  • MULTIPLEX Weed Pharm Peerless Scandinavia ProTemp
  • Russound Flachbildschirmzubehör Hauck Kinderwagen Radio Shack Türsprechanlagen KitchenAid Wasserkocher Olympus Sicherheitskameras
  • Kettler 07664-000 Sony-ericsson T630 Aigo A396 Acer TravelMate 7740 Samsung SGH-U900
  • Samsung SGH-X640 Bedienungsanleitung LG 55LY340C Bedienungsanleitung Rca 27000 Bedienungsanleitung NEC PlasmaSync 4210W Bedienungsanleitung